Robustel EV8100 VoIP Gateway
One of it’s primary application is for use in elevators but EV8100 is finding use in many other applications driven by the shutdown of PSTN networks and the 2G/3G sunsets globally.
4G Router with battery back-up
Robustel’s first 4G router with an integrated UPS (battery back-up)
VoIP and VoLTE supported
VoLTE as a backup voice communication line
Free router monitoring service
RCMS is Robustel’s free router monitoring service fully compatible with the EV8100.
EV8100 VoIP Gateway
Robustel’s EV8100 is an advanced 4G router, VoIP gateway & embedded PC all in one. One of t’s primary application is for use in elevators but EV8100 is finding use in many other applications driven by the shutdown of PSTN networks and the 2G/3G sunsets globally.
- VoIP and VoLTE supported, VoLTE as a backup voice communication line
- Battery holder for EN 81-28 and AS1735 compliance
- Highly stable 4G/3G/2G cellular connectivity with global band coverage
- High performance compute engine with 8 GB eMMCFlash for running complex customer applications
- ‘Docker’ containerization supported
- 1 x RS232, 1 x RS485 +1 x CAN for connection to industrial/legacy devices
- 4 x DI & 1 x Relay for simple monitoring and control
- Dual SIM card slots for redundant communications
- 802.11ac Wi-Fi (optional) supporting AP and Client modes
- Bluetooth (optional), Bluetooth 5.2 compliant
- Supports C, C++, Java, Python, Node.js etc. for users to develop their own applications
- Wireguard/IPsec/OpenVPN/GRE/L2TP/PPTP/DMVPN+ more VPN options
- Supports RCMS- Robustel’s router/gateway management platform for effective management of large estates of devices
Hardware specs
| Hardware System | |
| CPU | ARM Cortex-A7, 792MHz |
| RAM | 512 MB DDR3 |
| Flash | 8 GB eMMC |
| Cellular Interface | |
| Number of antennas | 2 |
| Connector | SMA-K |
| SIM | 2 x Mini SIM (2FF) |
| FXS | |
| Number of ports | 1 |
| Connector | 2-pin 5.08mm terminal block |
| Signal | TIP, RING |
| Ethernet Interface | |
| Ports | 2 x RJ45, 10/100Mbps, LAN or WAN, 1 KV magnet isolation protection |
| Serial Interface | |
| Type | 1 x RS232, 1 x RS485 +1 x CAN |
| Connector | 3.5 mm terminal block |
| ESD protection | 8 KV Air, 4 KV Contact |
| Baud rate | 300 bps to 115200 bps for RS232/RS485, up to 1Mbps for CAN |
| Signal | RS232: TXD, RXD, GND RS485: A, B, GND CAN: CAN_H,CAN_ L, GND |
| DI/Relay Interface | |
| Number of ports | 4 x DI(Wet contact) + 1 x Relay(Dry contact) |
| Connector | 3.5 mm terminal block |
| Absolute maximum VDC | + 30V DC(DI), +40VDC(Relay) |
| Absolute maximum ADC | 100 mA(DI), 300mA(Relay) |
| Signal definition | DI1+, DI1-, DI2+, DI2-, DI3+, DI3-, DI4+, DI4- NC, NO, COM |
| WiFi Interface (Optional) | |
| Number of antennas | 2 |
| Connector | RP-SMA-K |
| Standards | 802.11a/b/g/n/ac, 2 x 2 MIMO, supports AP and Client modes |
| Frequency bands | 2.4 GHz/5 GHz |
| Bluetooth Interface (Optional) | |
| Number of antennas | 1 (Multiplexing Wi-Fi antenna) |
| Connector | RP-SMA-K |
| Standards | Bluetooth 2.1 and 3.0+Enhanced Data Rate (EDR) + Bluetooth 5.2 |
Others
| Others | |
| Reset button | 1 x RST |
| Switch | 1 x Battery Switch |
| USB | 1 x USB 2.0 (host), Type A, 5V, 500mA |
| LED indicators | 1 x Battery, 1 x RUN, 1 x Line, 1 x MDM 1 x RSSI, 1 x Cloud, 1 x Device |
| Watchdog | External |
| Battery | |
| 1. Battery holder for 2 x 18650 lithium batteries (not included by default). 2. Device is only compatible with 18650 (flat top) type of lithium batteries. 3. lf using a single battery, install it in position 1. 4. Improper installation or use of incorrect batteries may damage the device and void warranty. |
| VOIP | |
| Protocols | SIP (RFC3261) over UDP, SIPs, SRTP |
| DTMF | In-band, RFC2976, RFC 2833 |
Software features
IPsec, OpenVPN, GRE, L2TP, PPTP, DMVPN, Wireguard*
| Operating System | RobustOS Pro (Based on Debian 11(bullseye)) |
| Supported programming
languages | C, C++, Python, Java, Node.js, etc.
(for users to develop own applications) |
| Debian Repository available | |
| Flash available for SDK | 6GB |
| RAM available for SDK | 256 MB |
| Apps* | Language, RCMS, etc. |
*Request on demand. For more Apps please visit www.robustel.com
Power Supply and Consumption
| Connector | 2-pin 3.5 mm terminal block with lock |
| Input voltage | 9~30V DC |
| Power consumption | ldle: 4W Data link: 25W (peak) |
Physical Characteristics
| Ingress protection | IP30 |
| Housing & Weight | Plastic, 470g |
| Dimensions | 170 x 150 x 35 mm |
| Installations | Desktop, wall mounting and 35 mm DIN rail mounting Optional magnetic mounting, the suction iron is a detachable part |
| Operating temperature | -20~+60℃(Without battery) 0 ~ + 45 °C(With battery) Note: The battery can be charged at 0~35°C |
| Storage temperature | -40 ~ + 85 °C(Without battery) -20 ~ + 35 °C(With battery for long term) |
| Relative humidity | 5~95% RH |
Regulatory and Type Approvals
| Environmental | RoHS2.0 |
| EMI | EN 55032 Conducted Emission class B
EN 55032 Radiated Emission class B |
| EMS | EN 61000-4-2 (ESD) Level 2
EN 61000-4-3 (RS) Level 3 EN 61000-4-4 (EFT) Level 2 EN 61000-4-5 (Surge) Level 2 EN 61000-4-6 (CS) Level 2 |
Speak to an Expert
M2M uses your personal data to send the information you have requested and for possible telephone contact. If you have chosen the above option, we will use your data for marketing and sales purposes. You can easily unsubscribe at any time. View our privacy statement on m2mdataconnect.com
